Table of Contents
- 1 Here’s Why You Should Consider the Omega J8006 Nutrition Center Masticating Juicer:
- 1.1 ==>> Get Juicing With the Omega J8006 Now <<==
- 1.2 So What Exactly is Oxidation?
- 1.3 Is It Easy To Clean?
- 1.4 What Features Does it Have That Might Enhance User Experience?
- 1.5 What is a Two-Stage Juicing System?
- 1.6 How Much Space Does it Take Up?
- 1.7 How Does it Do With Leafy Greens?
- 1.8 Does it Take a Longer Time to Process Than a Centrifugal Juicer?
- 1.9 What Kind of Warranty Does the Omega J8006 Nutrition Center Juicer Have?
- 1.10 What Are Some Negative Factors About This Juicing Machine?
- 1.11 Some Tips For Getting the Most Out of Your Omega Juicer
- 1.12 Is it Possible To Actually Make Pasta With This Machine?
- 1.13 How About Making Nut Butter or Almond Milk?
- 1.14 How Much Does It Cost?
- 1.15 To Summarize:
Here’s Why You Should Consider the Omega J8006 Nutrition Center Masticating Juicer:
(4.6 / 5)
First of all, 1866 people can’t be wrong, can they? That’s the number of juicing advocates out there that have given the Omega J8006 Nutrition Center Juicer a 5-star rating on Amazon as of this post. That’s out of 2423 ratings altogether. Not bad.
There are a lot of reasons why people like this top of the line well-built juicer. For people starting out with a centrifugal juicing machine, this is the next step up. Let’s say you’ve been juicing the centrifugal way for awhile now and are feeling much better than before you started juicing. But you’ve tried putting leafy greens in your centrifugal machine and you just aren’t getting the amount of juice you know you should be getting and wanting.
You’re sure you want to keep up this healthy lifestyle, as it seems to be helping you lose weight, and you know you’re getting a lot more nutrition than you were before.
So, you want to try a masticating juicer. This type of juicer will give you even more nutritional value from the produce you use because you don’t have to worry about the heat that the centrifugal juicer generates.
Instead of being spun through a spinning blade, the fruits and vegetables that go into the masticating machine get squeezed by an auger made of very strong Ultem plastic (8 times stronger than other plastics) at a very slow speed of 80 rpms.
This process squeezes out more juice, leaving a very dry pulp that is deposited in a separate pulp bin. The fact that there is no (or a very minimal) amount of heat involved means that oxidation is delayed for a couple of days rather than a few minutes as with the centrifugal machines.
So What Exactly is Oxidation?
It’s my understanding that the heat that occurs from the friction caused by a centrifugal juicer whose blade is spinning at high rpms will cause rapid breakdown of the natural anti-oxidants found in food.
This leads to oxidation, which is a destructive process that robs the food of its nutritional value.
Because a masticating juicer merely squeezes the juice out, there is no heat involved, so the enzymes and other nutritional benefits you get from the juice will remain intact for a longer period of time. However, the sooner you drink it, the better, as eventually the oxygen in the air will break down the chemical makeup of the juice causing oxidation and loss of nutrients.
Is It Easy To Clean?
Yes, if done so immediately after use. As with any juicer, the longer the residue is left on the juicer before cleaning, the more difficult it will be to clean.
What Features Does it Have That Might Enhance User Experience?
- Can be used as a food processor to chop and mince such things as nuts, garlic, ginger roots and more
- Has a strong 2HP motor
- Reverse button in case it clogs – just reverse a few times and it should un-clog
- Has the ability to grind coffee beans and flour
- Has an extra filter mesh for straining out more pulp after juicing if it still isn’t quite as smooth as you’d like
- Two different screens – one for juices and one for mincing, grinding and homogenizing
- Two stage juicing system to get as much juice out of the pulp as possible, leaving a very dry pulp
- It’s quiet enough to talk over as it works
- Automatic pulp ejection system – watch the pulp come out into one container as the juice pours into another
- Four feet for stabilizing as opposed to the body just sitting on the counter as others do
- 110 volts, 150 watts
What is a Two-Stage Juicing System?
This means that during the first phase, the produce is being squeezed by an auger against a mesh screen, extracting juice. But before the pulp actually comes out into the container, it is squeezed again against another screen and more juice is extracted. This ends up giving you the most possible juice and producing a very dry pulp.
How Much Space Does it Take Up?
The masticating juicers are longer than the centrifugal so it will take up a bit more space horizontally. The dimensions are 6.5″ x 14.5″ x 15.5″ tall from the counter to the top of the food chute. It weighs about 20 lbs. according to the manufacturer, so you might not want to have to lift it out of a cupboard every day if you have a place on the counter to leave it.
How Does it Do With Leafy Greens?
Fantastic. That’s what these machines are really good at. Leafy greens, such as kale, are filled with antioxidants to fight against certain types of cancer. Kale also has iron and vitamin K, which could help patients with Alzheimer’s. You’ll still want to fold up the greens into something like a ball to make it easier to process, but it will even get juice out of wheatgrass.
One warning about wheatgrass – Wheatgrass is a natural anti-oxidant, but can make you nauseous if you’re not used to it, so start out slow – a small amount added in with something like carrot juice to make it taste better.
When juicing wheatgrass, don’t over fill the chute – just use small amounts at a time – allow most of the juice to be extracted before putting more in the chute.
It will also juice spinach, cabbage and even pine needles, which are high in vitamin C, but might be better used in tea.
Does it Take a Longer Time to Process Than a Centrifugal Juicer?
Although you would think it would take longer because it squeezes instead of spins, there really isn’t much difference time-wise. It might take a few seconds longer, but nothing significant.
It does work at 80 rpms, compared to the low speed of 6500 rpms of the Breville 800JEXL Juice Fountain Elite. That’s quite a difference and is the reason why the enzymes are protected and no foam is generated and also why oxidation doesn’t occur so quickly.
What Kind of Warranty Does the Omega J8006 Nutrition Center Juicer Have?
There is a 15 yr. manufacturer warranty on this juicer for the repair or replacement of original parts that are defective from the factory.
What Are Some Negative Factors About This Juicing Machine?
- Narrow-throated chute – At 1 1/4 ” wide, you will have to cut some fruits and vegetables into smaller pieces to process
- Needs a little more muscle power – some produce you may find yourself having to push harder down the chute because it is being squeezed as opposed to being sliced up with the sharp blades of the centrifugal juicers
- There were some reviewer complaints about scratches on the auger and screen, but it seems to be from faulty machines or improper seating of the parts
- Takes up a little more horizontal space on the counter top
Some Tips For Getting the Most Out of Your Omega Juicer
- Never run it for more than 30 minutes at a time so it doesn’t overheat or get clogged up
- If you are juicing both soft and harder produce, start with the softer ones at low speed, then put in firmer ones at the higher speed
- Always let it run for a few seconds after the last piece of food is processed to get the last few drops of juice
- If you add something small, such as ginger, to enhance the taste, you’ll get the best results if you add it during the first half of the juicing process
- If you’re mostly doing green drinks, but need a little sweetness, try adding a carrot or beet
- When grinding up coffee beans, let greasy beans sit out overnight on a paper towel first to eliminate some of the grease. Then slowly add them to the machine to get a finely ground coffee
Is it Possible To Actually Make Pasta With This Machine?
It’s not advised to make the actual pasta dough with this machine, but you can certainly make noodles, linguini, and even bread sticks with the pasta dough you already have on hand. Some reviewers stated that they just got a messy goo when they tried this, so here are some tips to hopefully prevent that:
- Use a small amount of flour in the holding dish and sprinkled on the pasta as it comes out of the nozzle
- Make the dough into a ball or tube before placing in the chute
- Place it immediately in boiling water after you get the amount of noodles you want
- You can also add spinach or basil or other ingredients to the dough to create a flavorful pasta
How About Making Nut Butter or Almond Milk?
Yes to both of these. When making nut butter, which this machine excels at, be sure to remove the shells and/or skins from all the nuts and you may need to add additional oil to the nuts after processing.
To make almond milk, you will want to soak a cup of almonds in water overnight. The next day, put the cup of almonds in the juicer along with 3 cups of fresh water and run them through using the juicing attachment.
Then, run the pulp along with the juice through the machine a second time. If you want it really creamy, you can run it through again, but otherwise, when you’re done, just drain the milk through a cloth to get the fine particles out or just drink as is, depending on your taste preference.
How Much Does It Cost?
The Omega J8006 Nutrition Center Juicer is a high quality heavy duty masticating juicer with the capability of being used to process foods other than just fruits and vegetables. It’s a little more expensive than other juicers, such as the Jack LaLanne PJP Power Juicer Pro but you can do a lot more with it. So if you want to kick your juicing experience up a notch, I would recommend this juicer as a possible step up.
Official website: http://www.omegajuicers.com/juicers/juicer-8006.html
Manufactured in Korea